The DBF200H features 2 channels a clean FET channel and a fully loaded OVERDRIVE channel with separate DRIVE & VOLUME allowing you to dial in the exact amount of tube style overdrive you are looking for.
The DBF200H features a MIX setting on the channel selection that allows you to get the benefits of the clear precise bass tone of the FET channel and the warmth and articulation of the DRIVE channel giving you the best of both worlds!
The DBF200H also features a switchable preshape. Switching in the preshape applies an EQ curve set to scoop the mids, push the bottom and make the top end jump out. Great for playing slap or rock bass.
The amp boasts a powerful 3-band EQ with switchable mid voicing. Letting you dial in the exact bass tone you are after.
Tilt is a dynamic, powerful SEE-SAW EQ control. This control has a central neutral position. Turning the control clockwise increases the overall mid to high frequencies and decreases the lows thereby giving your sound more presence, which can be useful for cutting through live band situations. Turning the control anti clockwise reduces the overall mid to high frequencies and increases the lows making your overall sound rounder.
A 3.5mm jack for connecting an external sound source. Useful for jamming along with audio tracks. Plus, a 3.5mm jack for monitoring or silent practice.
The DBF200H features a MASTER VOLUME control that allows you to dial in the final volume level, after the preamp drive and volume controls have been set. Increasing the master volumes does not inherently change the tone of the amplifier.
The DBF200H features a high quality speakON® Compatible Combi Jack Output socket for connecting to an external cabinet of your choice. The minimum total load for this socket is 4 Ohms.
The DBF200H features a balanced XLR DI out for connecting to a PA or recording applications. The DI-OUT is sourced from the front stage of the amplifier. Before the FET/DRIVE channels and any EQ. If you are looking for a post FET/DRIVE and EQ output, then you can use the FX SEND/LINE out.
The DBF200H is equipped with an FX Loop. These sockets are used for connecting external effects device to your amplifier. Connect the send jack to the input of your external device and the return socket to the output. The DBF200H also features a footswitch socket for connecting a footswitch to enable/disable the drive channel remotely.
"The Digbeth Foundry have incredible power and versatility for their size. The DBF30 has so much bass response for something so small and budget friendly. Rear panel options like DI Out and FX Loop on the DBF50 and above are exactly what you need, any one of these amps could easily do a session or a gig, let alone for practice and rehearsal."